Trussforte Fixing Bracket Clamp Plates have been engineered to accompany the Trussforte range of fixing brackets. They have been designed to increase the capacity of the fixing brackets when used for bolt jointing (or Coach Screw jointing) arrangements that are specifically used in the tensile direction (Type 2 jointing arrangement). These clamp plates (together with the fixing brackets) have a tabulated range of capacities that correlate to the arrangements and length of fixing bracket/clamp plate used.
The combined clamp plate/fixing bracket capacities have been calculated in accordance with the appropriate relevant standards, and have been certified by an external structural engineering company accordingly. The following Australian Standards have been used:
All steel used for the manufacture of the clamp plates is based on a metallic coated product that is sourced locally from Australia where possible, and meets AS/NZS1365 and AS1397. The metallic coated steel properties have a minimum of 250MPa tensile strength, and also have a zinc coating class of Z275 (which is approximately 40 microns thick (0.04mm) and has a coating mass factor of 290 g/m² as per Bluescope sheet and coil product literature).
For all fixing bracket capacities (including the combined use of the clamp plate) please refer to the appropriate design literature in the appropriate accompanying documents.
Choose from 2 convenient pack sizes depending on the job that you are carrying out, or select multiples of the standard pack sizes for larger jobs.
Dimensioned drawing for Fixing Bracket Clamp Plates can be viewed and downloaded below.
Clamp Plate - Drawing No. FBCP503
Bolted / Coach Screw Jointing - Technical Data Sheet
Pick up now available in store. Or please call, email to discuss delivery.
Pick up now available in store. Or please call, email to discuss delivery. All Standard Brackets are made from 1.6mm thick metallic coated steel having a minimum of 250MPa tensile...
Pick up now available in store. Or please call, email to discuss delivery. All Heavy Duty Brackets are made from 3.0mm thick metallic coated steel having a minimum of 250MPa tensile...